|
Jupiter ULV i AIO POS System Specifications |
|
Model number: |
Jupiter ULV i All in One POS System |
|
LCD & Touch Panel |
|
LCD Panel |
15” High Brightness TFT LCD Panel with LVDS Interface |
|
Touch Panel |
15” Resistive or Capacitive Touch Panel Selectable ( ELO or Fujitsu or 3M selectable ) |
|
System Configuration |
|
System Performance |
VIA Lite Version |
VIA Pro Version |
Intel Lite Version |
Intel Pro Version |
|
Support VIA CPU Eden 1.0 GHz
(Without Fan) |
Support VIA CPU Eden 1.0 GHz (Without Fan) |
Support Intel Celeron-M 1.5 GHz CPU with Speed controlled Fan |
Support Intel Celeron-M 1.5 GHz CPU with Speed controlled Fan |
|
Main Memory: |
SODIMM 200 Pin DDR2 RAM * 1 up to 1 GB. |
SODIMM 200 Pin DDR1 RAM * 2 up to 2GB |
|
System Chip Set: |
North Bridge: VIA CN-700
South Bridge: VIA VT-8237R+ |
North Bridge :Intel 852GM
South Bridge: Intel ICH4 |
|
BIOS: |
Award BIOS With Enhanced ACPI 2.0 / PnP / APM / DMI / ESCD / PCI bus 2.1 / On Now / DRAM ECC |
|
AGP 3D Graphics Port: |
-VIA S3 AGP, Share memory from 16 MB up to 64 MB |
Intel Graphics Core,
Share memory from 8MB up to 64MB |
|
Input / Output Ports |
|
Serial Port: |
Totally 3 * COM Port exposed |
Totally 6 * COM Port exposed |
Totally 3 * COM Port exposed |
Totally 6 * COM Port exposed |
|
DC 5V / 12V output on pin 9th by jumper selector. Each Voltage Output with Poly Switch Protector. |
|
Arrange:
COM 1 / 3: Exposed for RS-232 Device.( Upper Side,DB-9 Male connector )
COM 2 : Touch Panel I/F |
Arrange:
COM 1 / 3: Exposed for RS-232 Device.( Upper Side,DB-9 Male connector )
. COM 2 : Touch Panel I/F
COM 4: Exposed for RS-232 Device.( Button Side,DB-9,Pro version only )
COM 5: RS-232( Button Side, RJ-45,Pro Version only )
COM 6: For Cash Drawer control ( Pro Version only, Selectable from exposed COM 6 DB-9 Connector ) |
Arrange:
COM 1 / 3: Exposed for RS-232 Device.( Upper Side,DB-9 Male connector )
COM 2 : Touch Panel I/F |
Arrange:
COM 1/ 3: Exposed for RS-232 Device.( Upper Side,DB-9 Male connector )
. COM 2 : Touch Panel I/F
COM 4: Exposed for RS-232 Device.( Button Side,DB-9,Pro version only )
COM 5: RS-232( Button Side, RJ-45,Pro Version only )
COM 6: For Cash Drawer control ( Pro Version only, Selectable from exposed COM 6 DB-9 Connector ) |
|
Parallel Port: |
One LPT port (SPP/EPP/ ECP). IRQ and address selectable by BIOS setup. ( Pro Version Only ) |
|
FDD: |
None ( External USB FDD option ) |
|
Optical Device Driver: |
External USB type CD-ROM / COMBO / DVD R/W |
|
USB: |
Totally 6 * USB port ( USB 2.0 ) support Windows 98/2000/XP/WePOS.
* One standard USB port located at Front Panel Extend connector.
* One USB port located at MSR Inter-connection Board for application.
* Two standard USB port located at upper I / O area.
* Two Powered USB ( One 5V and One 24V ) located at bottom I / O area. ( Pro version only) |
|
Enhance PCI IDE: |
On board PCI Bus Master IDE1/ 2 support Ultra DMA/33/66/100.( Four device ) |
|
S-ATA HDD Port |
1 x S-ATA HDD Port on board |
No support |
|
Powering System & Thermal |
|
Thermal Solution: |
- One Heat-sink for CPU & North Bridge Chip ( C7 2 GHz and Intel 852 GM Version with Speed controlled Fan ) |
|
Compact Flash Card: |
1 * Bootable Compact Flash Card Socket ( Type I/II , PATA Interface ) |
|
External Power Supply: |
DC 24V / 120W Sealed Power Adapter |
|
Fan-less DC 24V Sealed AT Type External sealed adapter . (UL, CSA, VDE, EMI meets FCC *B*). With Active PFC And OLP / OVP / OTP Function |
|
AC Power Source: |
AC 90 to 264V Full Range. |
|
Power On/Off Control: |
System bottom Side ATX Power trigger Switch. |
|
Ethernet Port:
(10/100 Mbs Auto) |
-Realtek RTL-8100CL Ethernet Chips on Board ( 10 / 100 Base T )
-ACPI/NT4.0/5.0 (NDIS 5).
-Remote Boot ROM for NT4.0.
-Enable or Disable by BIOS setup. |
Intel 82562GZ Ethernet Chip on Board
-Intel Ethernet Chips on Board
( 10 / 100 Base T,)
-ACPI/NT4.0/5.0 (NDIS 5).
-Remote Boot ROM for NT4.0.
-Enable or Disable by BIOS setup. |
|
Audio Port: |
-VIA VT1612A AC97 CODEC on board with Line In/ Line Out / MIC In.
( Line-Out exposed only ) |
-Realtek ALC 655 AC97 CODEC on board with Line In/ Line Out / MIC In.
( Line-Out exposed only ) |
|
PS/2 Keyboard Port: |
PS/2 type. |
|
PS/2 Mouse Port: |
PS/2 type. |
|
Physical Dimensions |
|
System Size : |
380MM(L) * 280MM(W) * 360MM(H)--- system to fold minimum height: 230MM |
|
Safety & Environment |
|
Operation Temperature: |
0 ℃ to 40 ℃ |
|
Storage Temperature: |
-25 ℃ to 70 ℃ |
|
S/W Compatibility: |
DOS/OS2 V2.1/SCO XENIX: V2.3.2/SCO UNIX V3.2/NOVELL/ WIN 3.1/ 95/98/2000/XP/NT4.0. |
|
Optional Device |
|
Optional Device (FIMSK): |
ISO Trick 1/2/3 Magnet Card Reader |
|
|
Smart Card Reader |
|
|
20 *2 VFD Customer Display |
|
|
Finger Print Sensor |
|
|
32 Key Programmable Keyboard |
|
|
i-Button ( Dallas Key ) secret sensor |
點(diǎn)擊圖片查看原圖
